DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.

GO TO 2.

CHECK DTC DETECTION

Start the engine.

Maintain the following conditions. (Keep 5 seconds or more after the selector lever shifted.)

Selector lever

: N -> D, N -> R, P -> R

Check the first trip DTC.

Is "P2814" detected?

YES

Go to Diagnosis Procedure .

INSPECTION END