DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Be careful of the driving speed.

PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.

GO TO 2.

PERFORM DTC CONFIRMATION PROCEDURE

Start the engine.

Maintain the following condition for 10 seconds or more.

Vehicle speed

: 20 km/h (12 MPH) or more

Stop the vehicle.
Check the first trip DTC.

Is "P0713" detected?

YES

Go to Diagnosis Procedure .

INSPECTION END