DTC Detection Logic

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

Possible causes

P0711

FLUID TEMP SENSOR A

(Transmission Fluid Temperature Sensor A Circuit Range/Performance)

When any of 1 or 2 is satisfied:

1. Under the following diagnosis conditions, CVT fluid temperature does not rise to 10 deg.C (50 deg.F) after driving for a certain period of time with the TCM-received fluid temperature sensor value between - 40 deg.C (-40 deg.F) and 9 deg.C (48.2 deg.F).
   1. TCM power supply voltage: More than 11 V
   2. CAN communication is normal
   3. Engine speed: 450 rpm or more
   4. Accelerator pedal position: 3 deg. or more
   5. Vehicle speed: 10 km/h (7 MPH) or more
   6. U0100, P0705 and P0706 are not detected.
   7. Selector lever: "D" position
2. When the condition of the final judgment is satisfied after satisfying that of the provisional judgment:
   1. Provisional judgment: All of the following conditions are satisfied within 2 seconds after the ignition switch is turned ON.
      • U0073, U0100, P0712 and P0713 are not detected.
      • CAN communication is normal.
      • TCM power supply voltage: More than 11 V
      • The difference between CVT fluid temperature and engine coolant temperature is 55 deg.C (131 deg.F) or more, or -27 deg.C (-16 deg.F) or less.
   1. Final judgment: When all of the following conditions are satisfied and this state is maintained for 300 seconds:
      • ECM is normal.
      • Provisional judgment is satisfied.

CVT fluid temperature sensor