Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK TRANSMISSION RANGE SWITCH
Check continuity between transmission range switch connector terminals.
Transmission range switch
Condition
Continuity
Terminal
7 - 10
Manual lever: "P" and "N" positions
Existed
Other than the above
Not existed
4 - 5
Manual lever: "P" position
Existed
Other than the above
Not existed
4 - 8
Manual lever: "R" position
Existed
Other than the above
Not existed
4 - 9
Manual lever: "N position
Existed
Other than the above
Not existed
4 - 2
Manual lever: "D" position
Existed
Other than the above
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
There is a malfunction of transmission range switch. Replace transaxle assembly. Refer to Removal and Installation .