DTC Confirmation Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.
GO TO 2.
- CHECK DTC DETECTION
- Turn ignition switch ON.
- Shift the selector lever through entire positions from "P" to "D". (Hold the selector lever at each position for 5 seconds or more.)
- Check the first trip DTC.
Is "P0705" detected?
YES
Go to Diagnosis Procedure .
NO
INSPECTION END