LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (Wiper & Washer System) >> Removal And Installation >> Front Wiper Drive Assembly >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front wiper drive assembly.
  2. Connect the harness connector to the front wiper motor.
  3. Operate the front wiper to move it to the auto stop position.
  4. Install the cowl top cover. Refer to Removal and Installation .
scientia non olet · About LEMON Manuals