LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 561 (Seats) >> Removal And Installation >> Front Seat >> Seat Cushion Blower >> Removal

Seat Cushion Blower: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat. Refer to Removal and Installation .
  2. Release seat cushion blower harness clip.
  3. Disconnect the harness connector from the seat cushion blower.
  4. Release seat back blower pawls and remove seat cushion blower motor.
scientia non olet · About LEMON Manuals