Bulb or Lens Replacement

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:

Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from bulb surface.
Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp.

Insert a suitable tool into the gap between the lens and the front room/map lamp assembly, then gently release the lens pawls and remove the lens.
Push the bulb inward slightly and twist it counterclockwise to remove from the front room/map lamp assembly.
Push the bulb in and twist clockwise to install.
Install the front room/map lamp lens.