DTC Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FRONT POWER WINDOW SWITCH RH OUTPUT SIGNALS

Turn ignition switch OFF.
Disconnect front power window motor RH.
Turn ignition switch ON.

Check voltage between front power window motor RH connector D104 terminals 1, 3 and ground.

Front power window motor RH		Ground	Condition	Voltage (approx.)
Connector	Terminal
D104	1	--	Power window and door lock/unlock switch RH UP	Battery voltage
	3		Power window and door lock/unlock switch RH DOWN

Is the inspection result normal?

YES

Replace front power window motor RH. Refer to Removal and Installation .

GO TO 2

CHECK FRONT POWER WINDOW SWITCH RH OUTPUT SIGNAL CIRCUITS

Turn ignition switch OFF.
Disconnect power window and door lock/unlock switch RH.

Check continuity between power window and door lock/unlock switch RH connector D105 terminals 7, 6 and front power window motor RH connector D104 terminals 1, 3.

Power window and door lock/unlock switch RH		Front power window motor RH		Continuity
Connector	Terminal	Connector	Terminal
D105	7	D104	1	Yes
	6		3

Check continuity between power window and door lock/unlock switch RH connector D105 terminals 7, 6 and ground.

Power window and door lock/unlock switch RH		Ground	Continuity
Connector	Terminal
D105	7	--	No
	6

Is the inspection result normal?

YES

Replace power window and door lock/unlock switch RH. Refer to Removal and Installation .

Repair or replace harness.