LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Exterior Lighting System - Led Headlamp (Circuit Diagnosis)) >> Circuit Diagnosis >> Optical Sensor >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OPTICAL SENSOR SIGNAL WITH CONSULT 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Select "HEADLAMP" in "Data Monitor" mode of "BCM".
    3. Turn lighting switch to AUTO.
    4. With the optical sensor illuminating, check the monitor status.

    Monitor item

    Condition

    Voltage (Approx.)

    OPTI SEN (DTCT)

    Optical sensor

    When illuminating

    3.1 V or more *

    When shutting off light

    0.6 V or less

    *: Illuminate the optical sensor. The value may be less than the standard value if brightness is weak.

    Is the inspection result normal?

    YES

    Optical sensor is normal.

    NO

    Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals