Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FRONT SIDE MARKER LAMP BULB
Check applicable lamp bulb.
Is the inspection result normal?
YES
GO TO 2 .
NO
Replace bulb. Refer to Bulb Replacement .
- CHECK FRONT SIDE MARKER LAMP POWER SUPPLY CIRCUIT
- Turn ignition switch OFF.
- Disconnect IPDM E/R connector and front side marker lamp connector.
- Check continuity between IPDM E/R harness connector and front side marker lamp harness connector.
Front combination lamp
IPDM E/R
Continuity
Connector
Terminal
Connector
Terminal
RH
E212
2
E201
90
Yes
LH
E217
Is the inspection result normal?
YES
GO TO 3 .
NO
Repair or replace harness.
- CHECK FRONT SIDE MARKER LAMP GROUND CIRCUIT
Check continuity between front side marker lamp harness connector and ground.
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E212
7
Yes
LH
E217
Is the inspection result normal?
YES
Check corresponding bulb socket and harness. Repair or replace if necessary.
NO
Repair or replace harness.