LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Audio, Visual & Navigation System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUSE 

    Check that the following fuses are not blown.

    Terminal No.

    Signal name

    Fuse No.

    7

    ACC power supply

    9 (10 A)

    19

    Battery power supply

    20 (20 A)

    Are the fuses blown?

    YES

    Replace the blown fuse after repairing the affected circuit.

    NO

    GO TO 2.

  2. CHECK POWER SUPPLY CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect audio unit connector M50.
    3. Check voltage between audio unit connector M50 and ground.

      Audio unit

      Ground

      Condition

      Voltage

      (Approx.)

      Connector

      Terminal

      M50

      7

      --

      Ignition switch: ON

      Battery voltage

      19

      Ignition switch: OFF

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Repair or replace harness or connectors.

  3. CHECK GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect audio unit connectors M82.
    3. Check continuity between audio unit connectors and ground.

      Audio unit

      Ground

      Continuity

      Connector

      Terminal

      M50

      20

      --

      Yes

      M82

      48 (For passenger van?

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Repair or replace harness or connectors.