Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
- Remove slide door finisher (if equipped). Refer to Removal and Installation - Cargo Van or Removal and Installation - Passenger Van .
- Support the slide door glass from the outside.
- From the inside, remove the 15 nuts (two standard nuts and 13 cap nuts) surrounding the slide door glass.NOTE: The location for the two standard nuts are under the inside handle assembly.
- Remove the slide door glass and slide door glass retainer.CAUTION:
- Be careful not to scratch the glass when removing.
- Do not set or stand the glass on its edge, small chips may develop into cracks.
- Remove the old sealant from the slide door glass. Clean the sealant from the slide door glass bonding area.