LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (Glass & Window System) >> Removal And Installation >> Side Window Glass >> Removal and Installation (Stationary Windows) >> Removal

Removal and Installation (Stationary Windows): Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove body side trim (if equipped). Refer to Removal and Installation - Rear Finisher (LH) (Cargo Van) (Cargo Van - LH Side), Removal and Installation - Rear Finisher (RH) (Cargo Van) (Cargo Van - RH Side), Removal and Installation - Rear Lower Finisher (LH) (Passenger Van) (Passenger Van - LH Side) or Removal and Installation - Rear Side Window Finisher (RH) (Passenger Van) (Passenger Van - RH Side).
  2. Support the side window glass from the outside.
  3. From the inside, remove the 14 nuts surrounding the side window glass.
  4. Remove the side window glass.
    CAUTION:
    • Be careful not to scratch the glass when removing.
    • Do not set or stand glass on its edge, small chips may develop into cracks.
  5. Remove the old sealant from the retainer. Clean the sealant from the bonding area.