Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the LH and RH rear defroster harness connectors.
Remove back door window glass using piano wire or power cutting tool and an inflatable pump bag.
- Apply protective tape around the back door window glass to protect the painted surface from damage.
- If the back door window glass is to be reused, mark the body and the glass with mating marks.
WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent glass splinters from entering your eyes or cutting your hands.
CAUTION:
- When the back door window glass is to be reused, do not use a cutting knife or power cutting tool.
- Be careful not to scratch the glass when removing.
- Do not set or stand glass on its edge, small chips may develop into cracks.
- Protect the painted surface around the glass from damage.
Remove the old sealant from the back door window glass. Clean the old sealant from the back door window glass bonding area.