Removal and Installation: Installation
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
- Apply medium strength thread locking sealant into the threaded holes for the carrier cover. Install dry carrier cover gasket and carrier cover and tighten the carrier cover bolts to the specification.
- Use Genuine Medium Strength Locking Sealant or equivalent. Refer to Recommended Chemical Products and Sealants .
CAUTION:- If carrier cover gasket is damaged replace it.
- Remove any moisture, oil, or foreign material from the application and mating surfaces.
- Install the brake tube to the carrier cover.
- Install the rear stabilizer bar bushings and clamps. Refer to Removal and Installation .
- Fill the rear final drive assembly with recommended differential gear oil. Refer to Changing Differential Gear Oil .