LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Body Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC C1735: IGN Circuit Open >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BCM IGNITION POWER SUPPLY CIRCUIT 

    Check BCM ignition power supply circuit. Refer to Diagnosis Procedure .

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Repair the malfunctioning part.

  2. CHECK IPDM E/R POWER SUPPLY CIRCUIT 

    Check IPDM E/R power supply circuit. Refer to Diagnosis Procedure .

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Repair the malfunctioning part.

  3. CHECK IPDM E/R IGNITION RELAY STATUS 

    SYMBOL CONSULT

    1. Select "IGN RLY" of IPDM E/R data monitor item.
    2. While operating the ignition switch, check the monitor status.

      Monitor item

      Condition

      Monitor status

      IGN RLY

      Ignition switch

      OFF

      Off

      ON

      On

    Is the inspection result normal?

    YES

    Replace BCM. Refer to Removal and Installation .

    NO

    Replace IPDM E/R. Refer to Removal and Installation .