LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (Automatic Transmission (Re7R01B) (2 Of 2)) >> Unit Disassembly And Assembly >> High And Low Reverse Clutch >> Assembly

High And Low Reverse Clutch: Assembly

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install high and low reverse clutch component part (dish plate, drive plates, driven plates, and retaining plate) to high and low reverse clutch drum.
    GNSJPDIA1195Z-195Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Snap ring

    SYMBOL

    : Retaining plate

    SYMBOL

    : Drive plate (five pieces)

    SYMBOL

    : Driven plate (five pieces)

    SYMBOL

    : Dish plate
    CAUTION: Check the order of plates.
  2. Install snap ring to high and low reverse clutch drum using a flat-bladed screwdriver.
    G04075903Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Be careful not to scratch high and low reverse clutch drum.
    • Be careful not to damage snap ring.
  3. Install bearing race to high and low reverse clutch drum.
    G04075901Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Check the direction of bearing race. Refer to Location of Needle Bearings and Bearing Races .
scientia non olet · About LEMON Manuals