Removal and Installation: Removal

A/T Fluid Cooler Tubes 

1. Remove front under cover. Refer to Removal and Installation .
2. Drain A/T fluid. Refer to Changing .
3. Remove hose clamps from A/T fluid cooler tube A and A/T fluid cooler tube B.
4. Disconnect A/T fluid cooler tube A from A/T fluid cooler hose C.
5. Disconnect A/T fluid cooler tube B from A/T cooler hose D.
6. Remove bolts from A/T fluid cooler tube A and A/T fluid cooler tube B.
   CAUTION: Do not reuse copper washers.
7. Disconnect clips and remove A/T fluid cooler tube A and A/T fluid cooler tube B.

A/T Fluid Cooler Assembly 

1. Remove front under cover. Refer to Removal and Installation .
2. Drain A/T fluid. Refer to Changing .
3. Remove front grille. Refer to Removal and Installation .
4. Disconnect A/T fluid cooler hose C from A/T fluid cooler assembly.
5. Disconnect A/T fluid cooler hose E from A/T fluid cooler assembly.
6. Remove bolts from A/T fluid cooler assembly.
7. Remove A/T fluid cooler assembly.

A/T Fluid Warmer 

1. Drain engine coolant. Refer to Changing Engine Coolant .
2. Remove front under cover. Refer to Removal and Installation .
3. Disconnect A/T fluid cooler hose D from A/T fluid warmer.
4. Disconnect A/T fluid cooler hose E from A/T fluid warmer.
5. Disconnect water hoses (2) from A/T fluid warmer (1).

   Courtesy of NISSAN NORTH AMERICA, INC.

6. Remove nuts (A) from A/T fluid warmer.
7. Remove A/T fluid warmer.
8. Remove A/T fluid warmer bracket (if necessary).