LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Defogger (Circuit Diagnosis)) >> Circuit Diagnosis >> Rear Window Defogger Switch >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HARNESS CONTINUITY 
    1. Turn ignition switch OFF.
    2. Disconnect front air control.
    3. Turn ignition switch ON.
    4. Check voltage between front air control connector and ground.

      Front air control connector

      Terminal

      Ground

      Voltage

      (Approx.)

      M49 (with manual A/C)

      18

      Battery voltage

      M53 (with automatic A/C)

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Replace front air control. Refer to Removal and Installation - Front Air Control (manual A/C) or Removal and Installation - Front Air Control (automatic A/C).

  2. CHECK HARNESS CONTINUITY 
    1. Turn ignition switch OFF.
    2. Disconnect BCM.
    3. Check continuity between BCM connector M18 terminal 10 and front air control connector.

      BCM connector

      Terminal

      Front air control connector

      Terminal

      Continuity

      M18

      10

      M49 (with manual A/C)

      18

      Yes

      M53 (with automatic A/C)

    4. Check continuity between BCM connector M18 terminal 10 and ground.

      BCM connector

      Terminal

      Ground

      Continuity

      M18

      10

      No

    Is the inspection result normal?

    YES

    Replace BCM. Refer to Removal and Installation .

    NO

    Repair or replace harness.