LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Door & Lock) >> Removal And Installation >> Steering Lock Unit >> Removal and Installation - Steering Lock Unit >> Removal

Removal and Installation - Steering Lock Unit: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery cables and wait at least three minutes. Refer to Removal and Installation .
  2. Remove the steering column. Refer to Removal and Installation .
  3. Using suitable tool, remove the steering lock unit tamper resistant self-shear type screws (A) and remove the steering lock unit (1) from the steering column.
    GNSAWKIA3735Z-735Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse screws. Replace with new tamper resistant self-shear type screws.
  4. If necessary, remove the NATS antenna amp. (if equipped). Refer to Removal and Installation .
  5. If necessary, remove the key cylinder. Refer to Removal and Installation - Key Cylinder .