Removal and Installation - Steering Lock Unit: Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:

Do not reuse screws. Replace with new tamper resistant self-shear type screws.
Tighten tamper resistant self-shear type screws until heads break off.

Adjust the neutral position of the steering angle sensor. Refer to Description .
For initialization and registration of mechanical keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.