Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

When installing the wheel sensor harness to the routing brackets, check that the wheel sensor harness is not twisted and the grommet is fully inserted into the bracket.
CAUTION:
- Do not twist the wheel sensor harness.
- Do not pull on the wheel sensor harness.
When installing disc rotor on wheel hub and bearing assembly, position the disc rotor according to alignment mark.