LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 531 (Seats) >> Unit Disassembly And Assembly >> Front Seat >> Disassembly and Assembly >> Seat Cushion - Passenger Seat

Seat Cushion - Passenger Seat

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Disassembly 

  1. Remove the recline/fold flat lever cover and the recline/fold flat lever.
  2. Remove the seat cushion outer finisher (RH).
  3. Remove the fold flat outer finisher (LH).
  4. Remove the seat cushion inner finisher (LH).
  5. Release the seat cushion rear retainers attached to spring.
  6. Release the seat cushion LH/RH side retainers attached to frame.
  7. Release the seat cushion front retainer.
  8. Remove the two rear push pins.
  9. Move the seat cushion trim away from the seat belt.
  10. Lift the seat cushion assembly upward to access the wire harness bracket. Remove the three wire harness bracket screws.
  11. Remove the seat cushion assembly.
  12. Remove the four seat cushion frame bolts and the seat cushion frame and seat cushion spring.
  13. Remove the seat cushion spring.
  14. Remove the seat belt buckle. Refer to Front Seat Belt .
  15. Separate the seat cushion trim from the seat cushion.

Assembly 

Assembly is in the reverse order of disassembly.

scientia non olet · About LEMON Manuals