LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 529 (Engine Lubrication System (4.0L)) >> Removal And Installation >> Oil Cooler >> Removal and Installation >> Notes

Removal and Installation: Notes

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Be careful not to burn yourself, as the engine oil and engine coolant may be hot.
  • Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator.
CAUTION:
  • Do not spill engine coolant on the drive belt.
  • Do not spill engine oil on rubber parts such as drive belts and engine mounting insulators.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.