Low Beam Operation
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
When the lighting switch is in 2ND position, the BCM receives input requesting the headlamps to illuminate. This input is communicated to the IPDM E/R via the CAN communication lines.
The CPU of the IPDM E/R controls the headlamp low relay coil which supplies power to the LH low beam headlamp and the daytime running light relay 2 which then supplies power to the RH low beam headlamp.