Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three minutes.
- Disconnect both the negative and positive battery terminals, then wait at least three minutes.
- Remove the steering column upper and lower covers. Refer to Removal and Installation .
- Rotate steering wheel clockwise to access first combination switch bolt and remove.
- Rotate steering wheel counterclockwise to access second combination switch bolt and remove.
- Disconnect harness connector from combination switch and remove.