LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 519 (Steering System) >> Basic Inspection >> Steering Wheel >> On-Vehicle Inspection and Service >> Checking Steering Wheel Turning Force

Checking Steering Wheel Turning Force

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park vehicle on a level, dry surface and set parking brake.
  2. Start engine.
  3. Bring power steering fluid up to operating temperature of 60 deg.- 80 deg.C (140 deg.- 176 deg.F).
  4. Tires need to be inflated to specified pressure. Refer to Tire .
  5. Check steering wheel turning force using Tool when steering wheel has been turned 360 deg. from the neutral position.
    G04134793Courtesy of NISSAN NORTH AMERICA, INC.

    Tool number

    : -- (J-44372)

    Steering wheel turning force

    : Refer to Steering Wheel .
  6. If steering wheel turning force is out of specification, inspect steering column. Refer to Removal and Installation .
  7. If steering column meets specification, repair steering gear. Refer to Disassembly and Assembly .
scientia non olet · About LEMON Manuals