LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (Brake System) >> Removal And Installation >> Brake Piping >> Rear >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the brake hoses and tubes for the following: no scratches; no twist or deformation; no interference with other components when steering the steering wheel; no looseness at connections.
  2. Depress the brake pedal with a force of 785 N (80 kg-f, 176 lb-f) and hold down the pedal for approx. 5 seconds with the engine running. Check for any fluid leakage.
    CAUTION: Retighten the applicable connection to the specified torque and repair any abnormal (damaged, worn or deformed) part if any brake fluid leakage is present.