LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (Brake System) >> Removal And Installation >> Brake Piping >> Front >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire assembly using power tool. Refer to Adjustment .
  2. Loosen the flare nut with a flare nut wrench and separate the brake tube and the brake hose.
    CAUTION:
    • Do not scratch the flare nut and the brake tube.
    • Do not bend sharply, twist or strongly pull out the brake hose or brake tube.
  3. Remove the union bolt (A) and copper sealing washers (1), and remove the brake hose from the brake caliper assembly.
    GNSAWFIA0795Z-795Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse copper sealing washers.
  4. Remove the brake hose nut.
  5. Remove the lock plate and remove the brake hose from the bracket.
  6. Remove the brake hose bracket.
scientia non olet · About LEMON Manuals