Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Apply the multi-purpose grease to the clevis pin and the matching faces.
Install the brake pedal assembly and hydraulic booster assembly nuts, and tighten it to the specified torque. Refer to Exploded View .
Perform adjustment after installation. Refer to Inspection and Adjustment .

NOTE: The clevis pin may be inserted in either direction.