LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (Brake System) >> Periodic Maintenance >> Brake Fluid >> Bleeding Brake System >> Brake Fluid Level Adjustment After Air Bleeding

Brake Fluid Level Adjustment After Air Bleeding

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Depress the brake pedal 20 times or more.
    NOTE: The pressure loss in the accumulator results in a large brake pedal stroke. In addition to this, the brake pedal depression becomes lighter in initial stage.
  3. Adjust brake fluid level to the reservoir tank MAX line.
    GNSDB117953Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not adjust with the ignition switch ON.
  4. Turn the ignition switch ON.
  5. Check that the reservoir tank brake fluid level is 4 - 12 mm (0.16 - 0.47 in) lower than the MAX line.
    NOTE: Since brake fluid is in the accumulator in pressurized condition, the reservoir tank brake fluid level should be lower than the MAX line.