LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (SRS Airbag Control System) >> Basic Inspection >> Inspection And Adjustment >> Special Repair Requirement >> Work Procedure When Replacing Air Bag Diagnosis Sensor Unit

Work Procedure When Replacing Air Bag Diagnosis Sensor Unit

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. SAVING VEHICLE SPECIFICATION 

    SYMBOL CONSULT Configuration

    Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification.

    NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing air bag diagnosis sensor unit.

    GO TO 2.

  2. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT 

    Replace air bag diagnosis sensor unit. Refer to Removal and Installation .

    GO TO 3.

  3. WRITING VEHICLE SPECIFICATION 

    SYMBOL CONSULT Configuration

    Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .

    WORK END