Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- SELF DIAGNOSTIC RESULT
CONSULT
- Start the engine.
- Turn the Blind Spot Warning system ON.
- Select "All DTC Reading" mode.
- Check if "U1010" is detected as the current malfunction in "Self Diagnostic Result" mode of "SIDE RADAR LEFT".
Is "U1010" detected?
YES
Replace the side radar LH. Refer to Removal and Installation .
NO
Inspection End.