Data Monitor
Display Item List
|
Monitor item |
Value |
Contents |
|
AMB TEMP SEN |
" deg.C/ deg.F" |
Displays ambient sensor signal. |
|
IN-VEH TEMP |
" deg.C/ deg.F" |
Displays in-vehicle temperature sensor signal. |
|
INT TEMP SEN |
" deg.C/ deg.F" |
Displays intake sensor signal. |
|
SUNLOAD SEN |
[w/m 2 ] |
Sunload sensor value converted from sunload sensor signal received from sunload sensor |
|
AMB SEN CAL |
" deg.C/ deg.F" |
Displays calculated ambient sensor signal. |
|
IN-VEH CAL |
" deg.C/ deg.F" |
Displays calculated in-vehicle sensor signal. |
|
INT TEMP CAL |
" deg.C/ deg.F" |
Displays calculated intake sensor signal. |
|
SUNL SEN CAL |
[w/m 2 ] |
Sunload value calculated by front air control |
|
COMP REQ SIG |
"On/Off" |
Displays compressor request signal. |
|
FAN REQ SIG |
"On/Off" |
Displays fan request signal. |
|
FAN DUTY |
"%" |
Displays duty cycle of blower motor. |
|
XM |
"units" |
Displays calculated air mix value. |
|
RRFAN REQ SIG |
"On/Off" |
Displays rear blower motor ON/OFF status transmitted to other units via CAN communication |
|
RR FAN DUTY |
"%" |
Duty ratio of rear blower motor judged by front air control |
|
C/BOX INTAKE SEN |
" deg.C/ deg.F" |
Displays calculated intake sensor signal. |
|
ENG COOL TEMP |
" deg.C/ deg.F" |
Engine coolant temperature signal value received from ECM via CAN communication. |
|
VEHICLE SPEED |
[km/h (mph)] |
Vehicle speed signal value received from combination meter via CAN communication. |