Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect combination meter connector and washer fluid level switch connector.
- Check continuity between combination meter harness connector M24 terminal 4 and washer fluid level switch harness connector E106 terminal 1.
4 - 1
: Continuity should exist.
- Check continuity between combination meter harness connector M24 terminal 4 and ground.
4 - Ground
: Continuity should not exist.
Is the inspection result normal?
YES
GO TO 2.
NO
Repair harness or connector.
- CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT
Check continuity between washer fluid level switch harness connector E106 terminal 2 and ground.
2 - Ground
: Continuity should exist.
Is the inspection result normal?
YES
Inspection End.
NO
Repair harness or connector.