LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Parking Brake Switch Signal Circuit >> DTC Diagnosis Procedure >> Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)

Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK PARKING BRAKE SWITCH CIRCUIT 
    1. Disconnect combination meter connector M23 and parking brake switch connector.
    2. Check continuity between combination meter harness connector M23 terminal 33 and parking brake switch harness connector M11 terminal 1.

      33 - 1

      : Continuity should exist.
    3. Check continuity between combination meter harness connector M23 terminal 33 and ground.

      33 - Ground

      : Continuity should not exist.

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Repair harness or connector.

scientia non olet · About LEMON Manuals