LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Oil Pressure Switch Signal Circuit >> DTC Diagnosis Procedure >> Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)

Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OIL PRESSURE SWITCH CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect IPDM E/R connector E122 and oil pressure switch connector E211.
    3. Check continuity between IPDM E/R harness connector E122 terminal 42 and oil pressure switch harness connector E211 terminal 1.

      Continuity should exist.

    4. Check continuity between IPDM E/R harness connector E122 terminal 42 and ground.

      Continuity should not exist.

    Are the inspection results normal?

    YES

    Inspection End.

    NO

    Repair harness or connector.