LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Oil Pressure Switch Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. COMBINATION METER INPUT SIGNAL 
    1. Select METER/M&A on CONSULT.
    2. Monitor OIL W/L of DATA MONITOR while operating ignition switch.

    OIL W/L

    When ignition switch is in ON position (Engine stopped)

    : ON

    When ignition switch is in ON position (Engine running)

    : OFF

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Check oil pressure switch signal circuit. Refer to Diagnosis Procedure .