Component Inspection

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FUEL LEVEL SENSOR UNIT
Remove the fuel level sensor unit. Refer to Removal and Installation - VQ40DE (with VQ40DE) or Removal and Installation - VK56VD (with VK56VD).

GO TO 2.

CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP

Check the resistance between terminals 2 and 5.

Courtesy of NISSAN NORTH AMERICA, INC.

Terminal

Float position

mm (in)

Resistance value

(Approx.)

Empty

7.5 (0.3)

80 Ohm

Full

218.9 (8.6)

6 Ohm

*1 and *2: When float arm is in contact with stopper.

Is the inspection result normal?

YES

Inspection End.

Replace fuel level sensor unit and fuel pump. Refer to Removal and Installation - VQ40DE (with VQ40DE) or Removal and Installation - VK56VD (with VK56VD).