LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 503 (Engine Mechanical (4.0L)) >> Unit Disassembly And Assembly >> Engine Unit >> Dowel Pin Alignment >> Removal

Dowel Pin Alignment: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use suitable tool to lock the drive plate, and match mark (A) the drive plate before removing the bolts.
    GNSDB115753Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not damage the ring gear teeth, or the signal plate teeth behind the ring gear.
  2. Remove drive plate.
    G04073098Courtesy of NISSAN NORTH AMERICA, INC.
    • Loosen the drive plate bolts in a diagonal order.
    CAUTION:
    • Do not place drive plate with signal plate facing down.
    • When handling the signal plate, take care not to damage or scratch it.
    • Handle the signal plate in a manner that prevents it from becoming magnetized.
scientia non olet · About LEMON Manuals