LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 503 (Engine Mechanical (4.0L)) >> Removal And Installation >> Fuel Injector And Fuel Tube >> Removal and Installation >> Notes

Removal and Installation: Notes

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Put a "CAUTION FLAMMABLE" sign in the workshop.
  • Be sure to work in a well ventilated area and furnish workshop with a CO 2 fire extinguisher.
  • Do not smoke while servicing fuel system. Keep open flames and sparks away from the work area.
  • To avoid the danger of being scalded, do not drain engine coolant when engine is hot.
CAUTION: Do not remove or disassemble parts unless instructed.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.