LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Engine Control System (DTC/Circuit Diagnosis) (1 Of 3)) >> DTC/Circuit Diagnosis >> DTC P0022: Intake Valve Timing Control >> DTC Description

DTC Description

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

DTC No.

Trouble diagnosis name

(Trouble diagnosis content)

Detecting condition

Possible cause

P0022

A camshaft position B2

("A" camshaft position - timing over-retarded bank 2)

During the retarded control of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more.

  • Crankshaft position sensor (POS)
  • Camshaft position sensor (PHASE)
  • Intake valve timing control solenoid valve
  • Accumulation of debris to the signal pick-up portion of the camshaft
  • Timing chain installation
  • Foreign matter caught in the oil groove for intake valve timing control