LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (Engine Control System (DTC/Circuit Diagnosis) (2 Of 3)) >> DTC/Circuit Diagnosis >> DTC P0345: CMP Sensor (Phase) >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

DTC No.

Trouble diagnosis name

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P0345

CMP SEN/CIRC-B2

[Camshaft position sensor (PHASE) (bank 2) circuit]
  • The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
  • The cylinder No. signal is not sent to ECM during engine running.
  • The cylinder No. signal is not in the normal pattern during engine running.
  • Harness or connectors

    [CMP sensor (PHASE) circuit is open or shorted.]

  • CMP sensor (PHASE)
  • Camshaft (INT)
  • Starter motor
  • Starting system circuit
  • Dead (Weak) battery
scientia non olet · About LEMON Manuals