LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (Engine Control System (DTC/Circuit Diagnosis) (2 Of 3)) >> DTC/Circuit Diagnosis >> DTC P0335: CKP Sensor (Pos) >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

DTC No.

Trouble diagnosis name

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P0335

CKP SEN/CIRCUIT

[Crankshaft position sensor (POS) circuit]
  • The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
  • The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
  • The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
  • Harness or connectors

    [CKP sensor (POS) circuit is open or shorted.]

  • Crankshaft position sensor (POS)
  • Signal plate
scientia non olet · About LEMON Manuals