LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (Engine Control System (DTC/Circuit Diagnosis) (2 Of 3)) >> DTC/Circuit Diagnosis >> DTC P0315: Crankshaft Position >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P0315

Crankshaft position

(Crankshaft Position System Variation Not Learned)

Diagnosis condition

Engine run and fuel shut off

  • Signal plate
  • Crankshaft position sensor
  • Harness or connectors (Crankshaft position sensor circuit is open or shorted.)

Signal

-

Threshold

Learning value of signal plate variation is abnormal or not learned.

Diagnosis delay time

-