LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (Automatic Transmission (Re7R01B) (1 Of 2)) >> Basic Inspection >> A/T Position >> Adjustment

A/T Position: Adjustment

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Shift selector lever in "P" position.
  2. Loosen nut (A).
    GNSALDIA0836Z-836Courtesy of NISSAN NORTH AMERICA, INC.
  3. Rotate wheel and carry out park locking.
  4. Pull control cable (1) toward the direction of arrow (SYMBOL ) and release hand from cable to leave it in a natural state and then temporarily tighten nut by hand.
    CAUTION: Be careful not put any load to manual lever.
    NOTE: Pull control cable with a force of 9.8 N (approximately 1 kg, 2.2 lb).
  5. Tighten nut to specified torque. Refer to Exploded View .
scientia non olet · About LEMON Manuals