Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK POWER SUPPLY
- Turn ignition switch OFF.
- Disconnect auto anti-dazzling inside mirror (HomeLink ® universal transceiver) connector.
- Check voltage between auto anti-dazzling inside mirror (HomeLink ® universal transceiver) harness connector and ground.
Auto anti-dazzling inside mirror
(HomeLink ® universal transceiver) connector
Terminal
Condition
Voltage (V)
(Approx.)
R4
10
Ground
Ignition switch position: OFF
Battery voltage
6
Ignition switch position: ON
Is the inspection result normal?
YES
GO TO 2 .
NO
Check the following items:
- 10A fuse No. 30 located in the fuse block (J/B).
- 10A fuse No. 9 located in the fuse block (J/B).
- Harness for open or short between fuse and auto anti-dazzling inside mirror (HomeLink ® universal transceiver).
- CHECK GROUND CIRCUIT
Check continuity between auto anti-dazzling inside mirror (HomeLink ® universal transceiver) harness connector and ground.
Auto anti-dazzling inside mirror
(HomeLink ® universal transceiver) connector
Terminal
Ground
Continuity
R4
8
Yes
Is the inspection result normal?
YES
GO TO 3 .
NO
Repair harness.
- CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident .
Inspection End.