Component Function Check

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

CONSULT

Select "INTELLIGENT KEY" of "BCM".
Select "REQ SW-DR" or "REQ SW-AS" in "Data Monitor" mode.
Check that the function operates normally according to the following conditions:

Monitor Item	Condition		Status
REQ SW -DR	LH door request switch	Pressed	ON
		Released	OFF
REQ SW -AS	RH door request switch	Pressed	ON
		Released	OFF

Is the inspection result normal?

YES

Front door request switch is OK.

Refer to Diagnosis Procedure .