LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 496 (Fuel System) >> Unit Removal And Installation >> Fuel Tank >> Removal and Installation - VQ40DE >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch ON but do not start engine, then check the fuel pipe and hose connections for leaks while applying fuel pressure to the system.
  2. Start the engine, raise idle, and verify there are no fuel leaks at any of the fuel system connections.